Two Post Car Lift | Base Plate *Luxe | 9,000lb Capacity | Quick Lift USA Inc.
Manual/Spec Downloads
Features:
9,000lb Lifting Capacity
76.5”–78.25” Maximum Lifting Height with Adjustable Screw Pads | Up to 79.5”–81.25” with 3” Extension Adapters
112” Overall Height
136.25” Overall Width
100.75” Drive-Through Clearance
112.25” Width Between Columns
3.5” Minimum Pad Height
Baseplate Design for Garages with Lower Ceilings
110V Single-Phase Electric/Hydraulic System
Prewired with a Grounded Three-Prong Plug
Dual Hydraulic Cylinders with Chain-and-Pulley Drive
Four Symmetrical Three-Stage Arms for Flexible Vehicle Positioning
Single-Point Safety Release
Automatic Arm Restraints
Includes 3” Extension Adapters and Adjustable Screw Pads
Protective Floor Cover for Crossover Cables and Hydraulic Lines
Automatic 2-Year Manufacturer Warranty on All Non-Wearable Parts
Local Installation (Phoenix-Metro) | $850 Flat! (See Installation Map for additional installation costs outside the Phoenix-Metro area.)
Free Local Delivery Within 25 Miles of Gilbert, AZ
Nationwide Shipping Available
*Lifts require a forklift, skid steer, or loader for unloading due to their size and weight*
Description:
The Quick Lift USA QL9KBP 9,000lb Two Post Baseplate Lift delivers dependable lifting capability for home garages and professional repair shops with lower ceilings. Its floor-level crossover design eliminates the overhead beam, while four symmetrical three-stage arms accommodate compatible cars, trucks, and SUVs within the lift’s rated capacity and lifting-point requirements. The 110V single-phase electric/hydraulic system comes prewired with a grounded three-prong plug.
Superior Design & Versatility:
Four symmetrical three-stage arms provide flexible positioning at vehicle lifting points. Included adjustable screw pads help establish secure, even contact, while 3” extension adapters accommodate higher lifting points. With 112.25” between columns and 100.75” of drive-through clearance, the QL9KBP provides practical room for vehicle positioning. Its 112” overall height suits garages where an overhead lift may not fit; adequate clearance for the raised vehicle is still required.
Safety & Reliability:
A single-point safety release operates both column locks, while automatic arm restraints help secure the arms during lifting. Equalizer cables coordinate carriage travel, and a protective baseplate cover shields the crossover cables and hydraulic lines. Always position the pads at the vehicle manufacturer’s recommended lifting points, verify stability shortly after lifting, and lower the vehicle onto the mechanical safety locks before working underneath it. Installation requires suitable, fully cured, level, crack-free concrete at least 4” thick with a minimum compressive strength of 3,000 psi.
Built to Last:
Dual hydraulic cylinders with chain-and-pulley drive provide lifting power, while self-lubricating UHMW polyethylene sliders and bronze bushings support smooth carriage movement. The gray-and-black powder-coat finish provides a clean, professional appearance. An automatic two-year manufacturer warranty covers all non-wearable parts, with no registration required.
Engineered for Professionals & Enthusiasts:
From routine maintenance to restoration projects, the QL9KBP combines 9,000lb lifting capacity with adjustable lifting points and straightforward controls. Its three-stage arms, adjustable screw pads, and included 3” extension adapters accommodate compatible vehicles with different lifting-point locations and heights.
Local Delivery & Installation:
Local Installation Available
Free Local Delivery Within 25 Miles of Gilbert, AZ
Nationwide Shipping Available


